ford type 9 gearbox with 4age engine

[oldeskewltoy]

As far as bolt in....







The only custom work REQUIRED would be to either shorten the stock driveshaft front section 1/2" - what I did in mine, OR go custom one piece. In either case... you will need to source a transmission yoke from something that ran the W5x transmission, Again in my case I sourced the front half of a MkII Supra driveshaft, and had that shortened and fitted to the rear half of the Corolla driveshaft - as seen below



custom carbon fiber one piece



EDIT - for full disclosure... the converted J160 adds 10 kilos over a T50