|
Permanent oil cooler vs thermostat
|
|
03-19-2015, 01:22 PM
Post: #5
|
|||
|
|||
|
RE: Permanent oil cooler vs thermostat
Remove the waxstat from the bottom of the TB. Verify that the water lines to the waxstat are actually functional. Spray or soak the waxstat in carb cleaner and re-assemble using a gasket sealer.
For the oil cooler, to reduce warm up time I place a thin sheet of fiberglass between the oil cooler frame and the fins. I added a hinge on the fiberglass sheet that allows me to uncover about half the area of the cooler. In spring and fall, I run half the area of the cooler, in winter it's completely closed off and in summer I remove the sheet. Dave W |
|||
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| Mocal oil cooler & sandwitch plate ordered | Gtsi-R | 48 | 54,706 |
11-18-2022 02:19 PM Last Post: FanIsHere |
|
| Oil cooler | totta Crolla | 0 | 1,541 |
07-25-2021 03:25 PM Last Post: totta Crolla |
|
| Oil cooler kit | izanagi | 7 | 8,582 |
09-20-2016 11:13 AM Last Post: harkes |
|
| trans oil, lsd oil change | Apolan | 9 | 16,943 |
10-01-2014 03:57 PM Last Post: mad.matt |
|
| oil cooler? | nikos_trd | 6 | 8,828 |
10-27-2013 08:30 AM Last Post: Apsogos |
|
User(s) browsing this thread: 8 Guest(s)