Tomei 16V poncams + Tomei technical trax 1.5 way LSD

[Lt86]

(09-13-2016 02:02 PM)Alex170984 Wrote:  I've got cat cams in mine 252/260 8.5/9.0mm lift.

My cr is 10.15 and the cams are terrible for low end torque. I've had to remove my tvis which has improved the situation.

I'm going to build a 11.2 - 11.5 CR engine in the coming months using the oem smallport pistons and a 1.01mm head gasket - I too have Been looking at the Poncams

Good to know!

I track the car from time to time. The most it has seen this year is Nurburgring.
That being said, the majority of it's miles are on the road, really using 2nd and 3rd
gear. So torque is what i'd like most (not very logical in these cars, I know. Haha!)

I'm not looking to damage this so I won't be using the cams you have.
Oldeskewltoy has recommened me to buy 2 exhaust cams from Catcams.
These ones: http://www.catcams.com/products/camshaft...TUP_id=827

Just realised how poor my understanding of what cam and why is so I'm gonna read up a little more.
Thanks for sharing your experience!