Problems Mintex M1155 pads

[jondee86]

Hmmm... if the pedal is still hard and does not go soft/down to
the floor, then it sounds like the pads are overheating. Should come
back to normal quite quickly as they cool down.

If the pedal goes soft/spongy/down to floor then it is the brake fluid
that has overheated and boiled. It can take a while and a lot of
pumping of the pedal to get any brakes back.

I'd suggest flushing the system with some new DOT4 fluid and bleeding
them carefully to make sure there is no air left in the system. That's a
cheap enough job, and if there is no improvement, you know that the
problem is with the pads or rotors.

Cheers... jondee86