Problems Mintex M1155 pads

[jondee86]

This is what the interwebz say...

BEDDING IN MINTEX “M” TYPE MATERIAL
M1144 / M1155 / M1166 / M1177

1. Clean discs with brake cleaner or other solvent.
2. Apply 3 to 4 light applications of the brake from 30mph down
to 0mph then......
M1144: 6 / 7 steady applications 70mph down to 30mph
M1155: 8 / 9 steady applications 90mph down to 30mph
M1166: 9 / 10 steady applications 90mph down to 30mph
M1177: 9 / 10 steady applications 90mph down to 30mph

FINALLY.... Leave to cool as long as possible ( They now work from cold )
NOTE: DONT LEFT FOOT BRAKE ! & DONT LOCK-UP THE BRAKES !

So you seem to have followed the recommended procedure. I do remember
reading somewhere that it is possible to transfer too much material from the
pads to the disc during bedding in. I'll have to see if I can find that again.

Cheers... jondee86