Door lock disassemble
03-16-2022, 06:57 AM
Post: #3
RE: Door lock disassemble
I have tried to disassemble my door locks on my Carina as they were getting stuck in the open position. I got as far as you did and decided not to tear them apart further. The small clips (called snaps in the Toyota EPC) are quite expensive so I kept them as is and lubricated the lock. I've put a bit of silicone spray on the gliders and that improved my issue.
You can still order these small plastic snaps separately. I think their partnumber should be 69759-20070 or 69759-20080 or 69759-20090 for the AE86.

1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 - RE: Door lock disassemble]
Visit this user's website Find all posts by this user


Messages In This Thread
Door lock disassemble - RWD - 03-15-2022, 10:28 PM
Door lock disassemble - Ivan141 - 03-15-2022, 11:04 PM
RE: Door lock disassemble - banpei - 03-16-2022 06:57 AM
Door lock disassemble - Bean - 03-17-2022, 02:03 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Lower arm hits toe arm on lock... fullybuiltmiata 12 13,973 01-14-2016 11:52 PM
Last Post: Deuce Cam
  boot lock - alternatives megabob 2 4,740 12-14-2013 07:08 PM
Last Post: Jan Pedersen
  differential lock % damusto 8 9,657 04-17-2013 10:01 PM
Last Post: damusto
  Is there anyway to LOCK the supercharger pulley on 4agZe ? Okami 6 6,097 07-06-2012 12:58 PM
Last Post: Okami
  Ignition lock problems :-S Ivan141 8 7,252 10-22-2005 12:36 PM
Last Post: Ivan141

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication