Is this diff whine and r&p or drive shaft bearing proble

Threaded Mode | Linear Mode

Is this diff whine and r&p or drive shaft bearing proble

08-14-2006, 12:03 PM

Post: #25

oli

Member

Posts: 83
Joined: Nov 2005
Reputation: 0

well still dont know the problem.

after a few other comments about the noise from the video, they think its metal on metal noise like teeth meshing, so an oil change is on the cards to check for big lumps of metal. however also been told if it was the diff the noise would be controllable by the accelerator (which it is not as out of gear on a slope the vibration noise is still the same) so most money lies on the centreprop bearing.

Will update and might just get a single piece shaft to see if that works as i want one anyway Hurray!

« Next Oldest | Next Newest »

Messages In This Thread

Is this diff whine and r&p or drive shaft bearing proble - oli - 08-03-2006, 08:57 AM

[] - Mux213 - 08-03-2006, 09:26 AM

[] - Ivan141 - 08-03-2006, 09:55 AM

[] - apardal - 08-03-2006, 10:19 AM

[] - oli - 08-03-2006, 10:25 AM

[] - oli - 08-03-2006, 10:32 AM

[] - Mux213 - 08-03-2006, 10:44 AM

[] - oli - 08-03-2006, 10:52 AM

[] - kenny - 08-03-2006, 12:13 PM

[] - Ivan141 - 08-03-2006, 01:48 PM

[] - oli - 08-03-2006, 03:48 PM

[] - Ivan141 - 08-04-2006, 07:55 AM

[] - oli - 08-04-2006, 09:15 AM

[] - Ivan141 - 08-04-2006, 10:40 AM

[] - Mux213 - 08-04-2006, 11:43 AM

[] - oli - 08-04-2006, 01:00 PM

[] - Ivan141 - 08-04-2006, 01:50 PM

[] - oli - 08-04-2006, 11:17 PM

[] - oli - 08-07-2006, 09:53 AM

[] - NoHachi - 08-07-2006, 12:46 PM

[] - jamiemirror - 08-07-2006, 08:50 PM

[] - Ivan141 - 08-08-2006, 09:47 AM

[] - oli - 08-08-2006, 11:47 AM

[] - Ivan141 - 08-08-2006, 01:27 PM

[] - oli - 08-14-2006 12:03 PM

[] - oli - 08-18-2006, 11:59 AM

[] - eight-six - 08-18-2006, 06:44 PM

[] - oli - 08-18-2006, 09:57 PM

[] - oli - 08-21-2006, 09:29 PM

[] - The Doctor - 08-21-2006, 11:17 PM

[] - eight-six - 08-22-2006, 01:30 AM

[] - oli - 08-22-2006, 08:38 PM

[] - eight-six - 08-22-2006, 10:16 PM

[] - Jezza_hr - 08-22-2006, 10:37 PM

[] - oli - 08-26-2006, 08:23 AM

[] - Mux213 - 08-26-2006, 09:21 AM

[] - NoHachi - 08-26-2006, 10:46 AM

[] - oli - 08-26-2006, 01:08 PM

[] - Mux213 - 08-27-2006, 01:35 AM

[] - oli - 08-27-2006, 06:41 PM

[] - Mux213 - 08-27-2006, 11:03 PM

[] - eight-six - 08-28-2006, 12:11 PM

[] - oli - 09-19-2006, 12:33 PM

[] - SutteR - 09-19-2006, 12:56 PM

[] - kungfumaster - 10-20-2006, 02:44 PM

[] - Mux213 - 10-20-2006, 03:04 PM

[] - NoHachi - 10-20-2006, 03:08 PM

[] - kungfumaster - 10-20-2006, 04:11 PM

[] - Ivan141 - 10-20-2006, 05:10 PM

[] - Mux213 - 10-20-2006, 07:07 PM

[] - DJexor - 10-20-2006, 07:46 PM

[] - kungfumaster - 10-21-2006, 01:45 AM

[] - Ivan141 - 10-21-2006, 11:12 AM

[] - oli - 10-25-2006, 09:26 PM

[] - Ivan141 - 10-25-2006, 09:32 PM

[] - jamiemirror - 10-25-2006, 09:55 PM

[] - oli - 10-25-2006, 10:14 PM

[] - oli - 10-31-2006, 10:37 AM

[] - jamiemirror - 10-31-2006, 10:39 AM

[] - oli - 10-31-2006, 05:57 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Play between steering column and intermediate shaft after manual rack sonversion	DaLanZhu	5	7,097	07-31-2019 11:28 AM Last Post: mad.matt
	Steering shaft issue	Ryo	15	13,208	11-19-2018 09:52 AM Last Post: Ivan141
	Gearbox and Diff options	MIGGZFSU	35	28,916	03-26-2017 12:00 AM Last Post: MIGGZFSU
	20v mains & big end bearing	izanagi	9	10,638	12-26-2016 12:42 PM Last Post: pack
	Final drive calculation.	Aram	31	32,875	12-24-2014 03:08 PM Last Post: Uzelac

User(s) browsing this thread: 3 Guest(s)