NEED HELP

[Mux213]

heya mate,

uhm, asfar as I know the 4AG never came with carbs standard, allthough I'm not 100% sure about that, I'm not Toyota expert . There are some guys out there that make after market adapters to put carbs on a 4AG sourced from a GTS, its a common thing on cars where they put a 4AG in that originally had a carbed engine. Its just a lot easier to put a carbed engine in a car that originally had a carbed engine, no hassle with EFI's, ECU's, wiring, etc.

So source a 4AG engine, there plenty out there, and get yourself an aftermarket carb setup. This may help you on your way: http://www.club4ag.com/faq%20and%20tech_...04A-GE.htm

As for the engine you have right now, it's most likely a 4AC thats in there. It's a 1600 cc single cam carbed engine (there was one other type of engine which was a 1500 cc with some differences but I think that one was sold in australia).

As for the rear axle, no idea what they are sold for in the US, here in Holland they go for roughly 250 dollars. If you're not planning on going sideways just yet you can move it alittle more down the list of priorities, I don't see the benefit of going from drum brakes to diskbrakes, just alot of hassle putting new brake lines in and changing the master brake cylinder (which is also why I suggest keeping the drum brakes on the LSD axle if you deside to swap). It is a junkyard search though, LSD units themselves do not fit in the smaller SR5 axle.