what do you use like suspensions ?
09-28-2006, 02:52 PM
Post: #10
 
NoHachi,

Isn't that the point Moto-P is trying to make with his Addendum in the technical articel I posted a link to in my post when I talked about shortening the struts? He has got some nice diagrams to clarify itBig Grin

Anyways nice info anyways, clearifies it from a more technical standpointBig Grin Indeed, using short stroke shocks with stock length struts and spacers, or using long stroke struts and lowering springs (or really any setup where you lower the car more then a couple of cm and you keep the stock struts lenght) is asking for trouble in the long run.

Don't go crazy though, if you got some nice APEX, KONI, INTRAX whatever sporty lowering springs that lower the car 2cm or so, you really don't loose enough travel to worry about these things. Generally speaking you're talking about lowering more then 4cm on a hachi when you're getting into trouble with travel (with TRD or Swift springs you will encounter this so defo shorten your struts!).

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user


Messages In This Thread
what do you use like suspensions ? - Spy - 09-27-2006, 08:29 PM
[] - Mux213 - 09-27-2006, 09:37 PM
[] - NoHachi - 09-27-2006, 10:40 PM
[] - Ivan141 - 09-27-2006, 10:47 PM
[] - NoHachi - 09-27-2006, 10:55 PM
[] - Mux213 - 09-27-2006, 11:17 PM
[] - kungfumaster - 09-28-2006, 12:30 PM
[] - Mux213 - 09-28-2006, 12:51 PM
[] - NoHachi - 09-28-2006, 02:45 PM
[] - Mux213 - 09-28-2006 02:52 PM
[] - NoHachi - 09-28-2006, 03:06 PM
[] - Mux213 - 09-28-2006, 03:14 PM
[] - mr monster - 09-29-2006, 12:50 AM
[] - Mux213 - 09-29-2006, 08:27 AM
in addition to the nice write up :) - cj - 09-29-2006, 11:01 AM
[] - Mux213 - 09-29-2006, 11:17 AM
[] - mr monster - 09-29-2006, 11:48 AM
[] - jamiemirror - 09-29-2006, 11:59 AM
[] - Holli - 09-29-2006, 12:07 PM
[] - mr monster - 09-29-2006, 12:13 PM
[] - Mux213 - 09-29-2006, 12:16 PM
[] - Mux213 - 09-29-2006, 12:17 PM
[] - NoHachi - 09-29-2006, 03:40 PM
[] - Holli - 09-29-2006, 04:34 PM
[] - Mux213 - 09-29-2006, 05:01 PM
[] - Holli - 09-30-2006, 08:47 AM
[] - Spy - 09-30-2006, 11:59 AM
[] - Mux213 - 09-30-2006, 12:45 PM
[] - Spy - 10-01-2006, 01:39 PM
[] - SutteR - 10-01-2006, 03:01 PM
[] - Spy - 10-01-2006, 03:33 PM
[] - Mux213 - 10-01-2006, 04:19 PM
[] - mrgud - 10-01-2006, 04:46 PM
[] - Mux213 - 10-01-2006, 06:01 PM
[] - Apolan - 10-14-2006, 01:58 AM
[] - szczursk - 03-25-2009, 08:40 PM
[] - Jan Pedersen - 03-26-2009, 08:40 AM
[] - szczursk - 03-26-2009, 08:11 PM
[] - joker12 - 03-27-2009, 03:37 PM
[] - Uzelac - 04-14-2009, 10:20 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Which threadsize to use for the vdo oil temp sensor? ditn 8 11,195 03-15-2012 01:56 AM
Last Post: Project D
  why do you use "roll center ajuster"? leckter 15 18,112 02-07-2012 07:04 PM
Last Post: Bean
  What's the LSD oil I should use? heshan 4 6,322 07-25-2011 08:13 PM
Last Post: heshan
  Has anyone used an aftermarket coil like MSD blaster? JDMitch 6 8,914 09-06-2010 06:14 PM
Last Post: Red
  Use LocTite on Bolts ????? juantonwan 2 3,815 05-22-2010 05:30 PM
Last Post: Eric

Forum Jump:


User(s) browsing this thread: 10 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication