what do you use like suspensions ?
10-01-2006, 06:01 PM
Post: #34
 
mrgud,

Sounds like a very good plan. some day we need to figure out what sorta info spring makers need to make springs and post some info for most common springs that don't overly lower the car or something.. much more cost effective....

As for making this a sticky, I think I'll put a link to this thread in the technical FAQ, problem we have with the technical forum is that we get to many stickies to easily so we try to grab everything within the technical FAQ

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user


Messages In This Thread
what do you use like suspensions ? - Spy - 09-27-2006, 08:29 PM
[] - Mux213 - 09-27-2006, 09:37 PM
[] - NoHachi - 09-27-2006, 10:40 PM
[] - Ivan141 - 09-27-2006, 10:47 PM
[] - NoHachi - 09-27-2006, 10:55 PM
[] - Mux213 - 09-27-2006, 11:17 PM
[] - kungfumaster - 09-28-2006, 12:30 PM
[] - Mux213 - 09-28-2006, 12:51 PM
[] - NoHachi - 09-28-2006, 02:45 PM
[] - Mux213 - 09-28-2006, 02:52 PM
[] - NoHachi - 09-28-2006, 03:06 PM
[] - Mux213 - 09-28-2006, 03:14 PM
[] - mr monster - 09-29-2006, 12:50 AM
[] - Mux213 - 09-29-2006, 08:27 AM
in addition to the nice write up :) - cj - 09-29-2006, 11:01 AM
[] - Mux213 - 09-29-2006, 11:17 AM
[] - mr monster - 09-29-2006, 11:48 AM
[] - jamiemirror - 09-29-2006, 11:59 AM
[] - Holli - 09-29-2006, 12:07 PM
[] - mr monster - 09-29-2006, 12:13 PM
[] - Mux213 - 09-29-2006, 12:16 PM
[] - Mux213 - 09-29-2006, 12:17 PM
[] - NoHachi - 09-29-2006, 03:40 PM
[] - Holli - 09-29-2006, 04:34 PM
[] - Mux213 - 09-29-2006, 05:01 PM
[] - Holli - 09-30-2006, 08:47 AM
[] - Spy - 09-30-2006, 11:59 AM
[] - Mux213 - 09-30-2006, 12:45 PM
[] - Spy - 10-01-2006, 01:39 PM
[] - SutteR - 10-01-2006, 03:01 PM
[] - Spy - 10-01-2006, 03:33 PM
[] - Mux213 - 10-01-2006, 04:19 PM
[] - mrgud - 10-01-2006, 04:46 PM
[] - Mux213 - 10-01-2006 06:01 PM
[] - Apolan - 10-14-2006, 01:58 AM
[] - szczursk - 03-25-2009, 08:40 PM
[] - Jan Pedersen - 03-26-2009, 08:40 AM
[] - szczursk - 03-26-2009, 08:11 PM
[] - joker12 - 03-27-2009, 03:37 PM
[] - Uzelac - 04-14-2009, 10:20 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Which threadsize to use for the vdo oil temp sensor? ditn 8 11,195 03-15-2012 01:56 AM
Last Post: Project D
  why do you use "roll center ajuster"? leckter 15 18,094 02-07-2012 07:04 PM
Last Post: Bean
  What's the LSD oil I should use? heshan 4 6,320 07-25-2011 08:13 PM
Last Post: heshan
  Has anyone used an aftermarket coil like MSD blaster? JDMitch 6 8,912 09-06-2010 06:14 PM
Last Post: Red
  Use LocTite on Bolts ????? juantonwan 2 3,815 05-22-2010 05:30 PM
Last Post: Eric

Forum Jump:


User(s) browsing this thread: 16 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication