Seam welding, a few questions
12-27-2006, 09:56 PM
Post: #3
 
ok,

Since you talk so loud Smile

I have a ae86,and i drove it for a short time before i rebuild it,i had before i took it apart mounted trd 6k front and 4,3k rear,and the car drove okay,
but not like the old red one i had, were there was a "weld in cage"in,this drove much better.
So when it had this silver one apart, i seam welded the front , and it made the car handle much firmer,in a good way,
the big diff i can fell,is when going over speedbumps,
then i can really fell the differrence

/Skassa

Any fool can go fast in a straight line.
VEMS Blacktop 4AGTE20V 272hp/350nm
"""www.turbotoys.dk"""
Find all posts by this user


Messages In This Thread
Seam welding, a few questions - Morten - 12-23-2006, 02:08 PM
[] - Morten - 12-27-2006, 09:07 PM
[] - Denmark - 12-27-2006 09:56 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 2,004 05-26-2024 07:40 PM
Last Post: totta Crolla
  Windscreen stoopid(?) questions.... Mylesmck 7 914 04-30-2024 09:46 PM
Last Post: Mylesmck
  Brake Bias Questions mad.matt 10 11,046 01-03-2019 04:54 AM
Last Post: mad.matt
  wider rear axle,track width,suspension questions ditn 6 8,561 10-18-2016 11:50 AM
Last Post: fantapants
  Suspension questions leon205gti 17 14,450 04-30-2016 09:26 PM
Last Post: krullibull

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication