Adapters for RX-7 brake conversion

Threaded Mode | Linear Mode

Adapters for RX-7 brake conversion

01-25-2007, 01:24 PM

Post: #37

jamiemirror Offline

Posting Freak

Posts: 1,638
Joined: Jan 2005
Reputation: 0

jamiemirror Wrote:
Quote:What about Nissan 200sx from 1992, they use 4x114 and 280mm (if I remember correctly)
Sorry no, LarsZ. These can't fit over the AE86 front hub.

Maybe I must apologize - I found Nissan's Qinton Hazel PN#BSF4850 4-lug disc with 280mm diameter but don't know for which car yet (suspect S14 (5-lug???) and Primera P11). Will find that too :-)
I found all disc dimensions, measured AE86 hub ones and disc CAN fit over the hub. The good news is that we can use 242, 257, 280 mm no-need-to-be-redrilled discs (bone stock from the stores) with the SAME offset (i.e. one adapter with different caliper mount holes).

I can make offset calculations and build such adapter independently from Mini/Honda version.

PS: The 280mm disc is used for following models:
(note that early S13 use 252mm disc!)
Primera P11, Almera II, 200SX S13.

« Next Oldest | Next Newest »

Messages In This Thread

Adapters for RX-7 brake conversion - peter møller - 01-18-2007, 10:09 AM

[] - cannabolic - 01-18-2007, 07:59 PM

[] - jamiemirror - 01-18-2007, 08:51 PM

[] - Ivan141 - 01-18-2007, 10:45 PM

[] - peter møller - 01-19-2007, 01:33 AM

[] - jamiemirror - 01-19-2007, 11:52 AM

[] - SekiguchiUeno - 01-19-2007, 12:03 PM

[] - jamiemirror - 01-19-2007, 12:06 PM

[] - peter møller - 01-19-2007, 08:12 PM

[] - jamiemirror - 01-19-2007, 08:40 PM

[] - LarsZ - 01-19-2007, 08:54 PM

[] - jamiemirror - 01-19-2007, 09:00 PM

[] - LarsZ - 01-19-2007, 09:03 PM

[] - jamiemirror - 01-19-2007, 09:06 PM

[] - peter møller - 01-19-2007, 09:35 PM

[] - jamiemirror - 01-19-2007, 09:44 PM

[] - robokill - 01-21-2007, 07:19 PM

[] - jamiemirror - 01-21-2007, 07:51 PM

[] - peter møller - 01-21-2007, 08:08 PM

[] - jamiemirror - 01-21-2007, 08:25 PM

[] - LarsZ - 01-21-2007, 08:28 PM

[] - jamiemirror - 01-21-2007, 10:57 PM

[] - robokill - 01-21-2007, 11:10 PM

[] - jamiemirror - 01-21-2007, 11:14 PM

[] - LarsZ - 01-21-2007, 11:23 PM

[] - jamiemirror - 01-21-2007, 11:46 PM

[] - robokill - 01-22-2007, 12:36 AM

[] - jamiemirror - 01-24-2007, 03:46 PM

[] - LarsZ - 01-24-2007, 05:16 PM

[] - cannabolic - 01-24-2007, 07:04 PM

[] - Ivan141 - 01-24-2007, 07:11 PM

[] - SekiguchiUeno - 01-24-2007, 07:33 PM

[] - NoHachi - 01-24-2007, 08:01 PM

[] - robokill - 01-24-2007, 08:04 PM

[] - E-volve - 01-24-2007, 08:53 PM

[] - jamiemirror - 01-24-2007, 09:05 PM

[] - jamiemirror - 01-25-2007 01:24 PM

[] - NoHachi - 01-25-2007, 01:31 PM

[] - jamiemirror - 01-25-2007, 04:45 PM

[] - NoHachi - 01-25-2007, 04:49 PM

[] - cannabolic - 02-28-2007, 11:20 PM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	20v Blacktop conversion....	Mylesmck	0	405	04-29-2024 05:48 PM Last Post: Mylesmck
	Kouki to Zenki Levin grill conversion?	Mylesmck	6	2,038	02-08-2024 10:30 AM Last Post: r.ave
	AFM to Map Conversion	ps13michi	3	3,050	01-06-2022 10:34 AM Last Post: ps13michi
	Sub panel and rotary-button replacement for Levin -> Trueno conversion	gh0st	9	5,199	11-05-2021 08:17 PM Last Post: gh0st
	AE86 single wiper conversion	kazi	6	9,229	08-26-2017 08:47 PM Last Post: kazi

User(s) browsing this thread: 6 Guest(s)