16V to 20V Blacktop (help!)
|
09-14-2007, 10:34 AM
Post: #10
|
|||
|
|||
Stock to start with :)
86Pilot Wrote:Is this the standard diameter of the flywheel: 212 dia? Blacktop flywheel is 212 dia and will fit (just) into the 4A=>T50 bell housing without any modifications. Lightest of the 4AGE flywheels too FWD engine does not have a spigot bearing fitted. It is just a standard 2RS bearing available for a few dollars from any bearing shop. You will need to measure the inside and outside diameter, as I don't have a note of the size. Otherwise buy it from an auto parts store. Tap it into the end of the crankshaft until it stops moving. Cheers... jondee86 The reasonable man adapts himself to the world; the unreasonable one persists in trying to adapt the world to himself. Therefore, all progress depends on the unreasonable man. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
16V to 20V Blacktop (help!) - 86Pilot - 09-12-2007, 03:59 PM
Keep it simple... - jondee86 - 09-13-2007, 11:00 AM
Stock to start with :) - jondee86 - 09-14-2007 10:34 AM
Mothra vs Godzilla !!!! - jondee86 - 09-14-2007, 12:35 PM
Re: Stock to start with :) - jamiemirror - 09-18-2007, 11:49 AM
[] - jamiemirror - 09-20-2007, 09:55 AM
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Refreshed 20v blacktop first start.. | Mylesmck | 6 | 815 |
10-07-2024 07:55 AM Last Post: Ivan141 |
|
20v Blacktop conversion.... | Mylesmck | 0 | 502 |
04-29-2024 05:48 PM Last Post: Mylesmck |
|
Improve 20V Blacktop cooling | pack | 0 | 1,006 |
06-07-2023 01:18 PM Last Post: pack |
|
Shims 20V Blacktop | CHOPKIN2 | 3 | 4,784 |
12-23-2017 11:07 PM Last Post: oldeskewltoy |
|
stock injector deadtime for 4age 20v silvertop/blacktop injector | ditn | 1 | 5,918 |
02-20-2016 11:48 AM Last Post: Bean |
User(s) browsing this thread: 8 Guest(s)