Fitting a TRD/CBY N2 front lip

[Jimmi The Kid]

Hi guys

I just bought a TRD/CBY style N2 fronlip from MCNSports, but when I tryed to fit it on my Zenki bumper, it has a 10mm gab between bumper and lip in the corners.

The question is, how high it should be mounted on the bumper?
Does anyone have some closeup pics or some messurements?

If I should mount it higher, I will need to cut holes in the bumper, for the airducts

[NoHachi]

Isn't the TRD lip supposed to go with the TRD widebody? They meet the widened fenders, not the stock ones.

[Jimmi The Kid]

Well, not the CBY one, but if you buy the original TRD, it only fit with flares.

I will try to take some pics to better explaine the problem.[/img]

[Maurice]

i know your problem, yes you will have to cut slots out of your bumper to allow duct to pass. if you dont want to cut your bumper you could cut the duct back so it passes the bumper bottom. If you dont do either of these the lip will point downwards. I didnt get mine from mcnsport but mine is 10/20mm too big as well but when you actually start fitting it, it will come in also you can fit a longer bumper support bar and push the bumper corners out to meet it. hope that helps

[Jimmi The Kid]

Thanks man. Can you do me a favour, and show me a closeup pics? Or messure the distance here? I will really appreciate it

[Maurice]

no problem i will do that tonight BUT i am fitting a TRD kit so i HAD to cut slots in the bumper in order to line with the arches/kit properly but you are not fitting that kit so you might get away without cutting the slots? i wouldnt go cutting the bumper if its in good condition when you dont need to?

[Jimmi The Kid]

Maurice Wrote:i wouldnt go cutting the bumper if its in good condition when you dont need to?

Exactly, my bumper is in MINT condition

[nzae86]

Fitted up my TRD kit without cutting any of the front bumper away . ??

[Jimmi The Kid]

nzae86 Wrote:Fitted up my TRD kit without cutting any of the front bumper away . ??

I have seen alot on your picture, but I can't se how high you have mounted it. When I fit it without cutting, it have some huge gabs all way around. Mayby I should just fill it with resin and fiberglass :wink: