Found a 4AGE 16V -> 20V conversion - what you guys think?

[heshan]

hey everyone, I'm was looking around the net and I found this a step-by-step tutorial for a DIY 20V conversion just the way i wanted it. But I'm wondering is it this easy? Does this tutorial cover all angles?

I'd appreciate your comments.

http://www.phuckdrifting.com/20Vinstall.html

[Jan Pedersen]

Its not bad but its not the way I went.

I prefer using an RWD water pump like Mr John: http://forums.club4ag.com/zerothread?id=1012

[heshan]

thanks mate. What are the replacements for the distributor which will also cause the firewall to be hammered? which ignition coils can be used to avoid the firewall from being hurt?

[Jan Pedersen]

I got some 2ZZFE coils. They need to be shaved a bit to fit but they could work. Or you could get some 2001-2005 Civic 1,6 coils - stock ECU can run these But they are so darn expensive here in Denmark

[heshan]

Do you have any pics of the coils for the Civic? cuz in my country we only get the JDM civics so I'm not sure if it'll have the same engines as the EU

[Jan Pedersen]

The Honda coils looks like this:

You should read this: http://forums.club4ag.com/zerothread?id=18900&page=1

[heshan]

Jan, isn't ECU having a single line for the distributor? how is the ignition timing done? some sort of external timing module?

[Jan Pedersen]

Read the link! I'm not using stock ECU so I didn't read it in detail

[heshan]

Thanks mate. Appreciate all your help.. Its truly appreciated..

[Jan Pedersen]

No problem mate - thats what AEU86 is all about