ae86 racecar with beams engine

[Blue86]

Hey man,

What brand is that rear diffuser?
Looking really good.

[bakonick]

mercury diffuser

[Maurice]

bakonick Wrote:in the 15x8 i have 205 45 15 toyo r888 andf in the 15x9 i have 225 45 15 also toyo r888

205/45/15 must be new tyre size release? which is good news as all along they only list 205/50 which is too big, are you having trouble with these hitting the body on full lock?

Also what thickness are your RCAs! biggest i have seen for sure!
surprised you did not have to lower the subframe to fit beams?

Thanks

Maurice

[bakonick]

i dont have problem with tyres becose the front wheels are 0 offset and i have also alloy hubs from http://www.grp4fabrications.com and they are 10mm wider to its side .
the rca are 45 mm from mcnsport .
as for the engine i took trd engine mounts from fensport for the beams
and i direct bold on them to the subframe .

[Maurice]

bakonick Wrote:i have also alloy hubs from http://www.grp4fabrications.com and they are 10mm wider to its side .

Oh right 10mm extra! i was looking at them alright should be a lot lighter than the original hubs which should help handling. well done nice spec everything you have will improve the car.
Just noticed you got the nagisa auto equal length boxes very nice! it will be a nice car to handle with that spec for sure

[bakonick]

you are welcome .
and yes they are a lot lighter than original ones.

[NoHachi]

Have you measured the weight difference between the Gp4 and OEM hubs?

Nice car!

[bakonick]

you got me there ....
nop

[coldvaper]

I can't find 205/45/15s on Toyo's site is this a EU thing only?

[4000GT]

They are special order.