sensor atachment?
07-10-2011, 05:31 PM
Post: #1
sensor atachment?
I´m going to fit my defi gauges soon, but I still need the sensor attachments.

Unfortunatly I cant´t be in my garage until then. That´s why I need your help.Smile I´ve searched, but somehow noone asked before?

What´s the inner diameter of the radiator hose?

I was thinking about ditching the OEM sensor and fit the defi with adapter.
Defis run with 1/8PT, but whats the thread in my block?
I´ve read Toyota pressure senders have 1/8 BSP? is that true?

Anyones knows where to get this adapter?

Thanks Smile

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
07-10-2011, 09:47 PM
Post: #2
sensor atachment?
radiator hose inner is bout 30 mm
[Image: AEU86 AE86 - sensor atachment?]

toyota MR2/wright off
subaru impreza non turbo/sold
subaru wrx sti type R 320 bhp/sold
88 opel omega/scraped
ford mondeo/scraped
current car 83 AE86 levin turbo
Find all posts by this user
07-12-2011, 04:47 AM
Post: #3
sensor atachment?
Thanks for the answer.
Already ordered the right adapter for it.

Anyone knows the thread of Toyota oil pressure sensors?

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
07-12-2011, 10:39 AM
Post: #4
sensor atachment?
1/8th NPT is for the oil pressure sensor i think, but don't quote me im not 100% sure, same as the water sensor.

Steve.....this is sparrrrrtan
Find all posts by this user
07-20-2011, 03:32 PM
Post: #5
sensor atachment?
I´ve read that Toyota pressure sensors come with 1/8 BSP a few times, that´s why I ordered an adaptor to see if its true. Smile

Next question, I also got a defi tacho with my gauges, so I need a rpm signal. I was going to connect it to the wire going from the ignitor to the tacho?
Or should I use either IGN or IGF?

Can anybody help? Dumb question

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
07-23-2011, 10:59 PM
Post: #6
sensor atachment?
Things got pretty difficult!

The defi pressure sensor seems to be a 1/8BSPT and therefore bolts straight to the block!

But this is not confirmed, yet.

Anyone got a clue for the tacho wiring?

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
07-23-2011, 11:20 PM
Post: #7
sensor atachment?
Look up the DEFI manual for that tacho to find out what type of signal it needs.
Coil(-) usually does the trick, but if it's not built to handle that, you are likely to blow up the electronics.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
08-08-2011, 01:48 AM
Post: #8
sensor atachment?
It turned out to be a rare defi oil pressure sender with 1/8" BSP and bolt perfectly to the block. No adaptors required!

But for the tacho wiring, they recomend the tacometer signal and I think that the one of the wires comming from the ignitor (yellow from memory).

I´ll try that and hope is doesn´t get fu**** Smile

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
08-08-2011, 03:52 AM
Post: #9
sensor atachment?
Actually the Japanese standard PT (Pipe Taper) is the same to BSPT (British Standard Pipe Taper) :wink:
http://mdmetric.com/tech/thddat7.htm#pt

So yes the sensor can be bolt straight up to the block Smile

Usually the most recurrent problem is when you want to fit defi sensor in sandwich plate (most have 1/8 NPT thread)
or
any 1/8 NPT sensor in Japanese plate (like Grex)
Find all posts by this user
08-08-2011, 01:39 PM
Post: #10
sensor atachment?
There we go, couldn´t find any info on a japanese standard PT.Banging head

All the other defi senders are 1/8"NPT, only the oil press senders were also avaliable in BSPT.
I just assumed the´re all NPT, thats why I struggeled an bought adaptors, that are now totally useless... Confused

The Greddy adaptor plate that came with my gauges has a BSPT port, but I´m not sure if its genuine.

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Lambda sensor wiring sam3007 10 4,269 05-23-2022 10:00 PM
Last Post: The Doctor
  AE86 Engine Coolant Temp Sensor izanagi 8 20,255 09-06-2014 05:47 PM
Last Post: izanagi
  Hall sensor totta Crolla 7 8,240 02-28-2014 10:07 AM
Last Post: Ivan141
  Video : Adjust the TPS (Throttle Pos Sensor) on the 4A-GE Homem Bomba 3 10,879 10-25-2013 05:13 PM
Last Post: Apsogos
  1/8 BSPT adapter for oil pressure sensor Dino86 4 7,001 06-15-2013 12:34 PM
Last Post: S.K.

Forum Jump:


User(s) browsing this thread: 13 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication