lowering - adj. panhard rod & rca's & panhard bushin

Threaded Mode | Linear Mode

lowering - adj. panhard rod & rca's & panhard bushin

05-24-2009, 01:03 AM

Post: #5

Rosedrift Offline

Senior Member

Posts: 448
Joined: Aug 2005
Reputation: 0

with my apex springs I never saw 35mm lowering! I would say about 20mm is more realistic. No need to change your panhard, it will be fine even with 40mm lowering. I have the rca's but I don't thing you really need them with apex springs. If you have trouble with the bushes you can burn them,they will come out much easier.... For the new ones use WD-40 and you are out of trouble

« Next Oldest | Next Newest »

Messages In This Thread

lowering - adj. panhard rod & rca's & panhard bushin - Apolan - 05-23-2009, 04:06 PM

[] - Bubble_Drift - 05-23-2009, 05:23 PM

[] - HybriD07 - 05-23-2009, 08:22 PM

Never mind the hype !!! - jondee86 - 05-24-2009, 12:14 AM

[] - Rosedrift - 05-24-2009 01:03 AM

[] - Apolan - 05-24-2009, 01:58 AM

[] - jondee86 - 05-24-2009, 05:16 AM

[] - Apolan - 05-24-2009, 10:20 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Question on Rod Bearings	mister86	3	3,999	03-19-2020 03:46 AM Last Post: oldeskewltoy
	RCA sizing	kazi	3	4,611	01-28-2018 10:44 PM Last Post: kazi
	rod-ends	Lajoosh	10	9,458	03-27-2012 10:24 PM Last Post: fax0815
	Panhard Rod Bolt Sizes	Corleone	8	8,301	11-07-2011 06:55 PM Last Post: Corleone
	lowering spring information HELP	martyg	1	3,424	09-27-2011 01:56 PM Last Post: martyg

User(s) browsing this thread: 2 Guest(s)