lowering - adj. panhard rod & rca's & panhard bushin

Threaded Mode | Linear Mode

lowering - adj. panhard rod & rca's & panhard bushin

05-24-2009, 05:16 AM

Post: #7

jondee86 Offline

Posting Freak

Posts: 947
Joined: Apr 2007
Reputation: 1

You need to press/hammer/nuke that metal sleeve out before you
press the poly bush in. Either use a suitable sized socket and a vice,
or if desperate, slit it with a hacksaw (carefully) and then prise it out
with a screwdriver.

Probably easier to cut the one for the other end in half, since it is
compressed by the nut and washer when installed.

Cheers... jondee86

« Next Oldest | Next Newest »

Messages In This Thread

lowering - adj. panhard rod & rca's & panhard bushin - Apolan - 05-23-2009, 04:06 PM

[] - Bubble_Drift - 05-23-2009, 05:23 PM

[] - HybriD07 - 05-23-2009, 08:22 PM

Never mind the hype !!! - jondee86 - 05-24-2009, 12:14 AM

[] - Rosedrift - 05-24-2009, 01:03 AM

[] - Apolan - 05-24-2009, 01:58 AM

[] - jondee86 - 05-24-2009 05:16 AM

[] - Apolan - 05-24-2009, 10:20 AM

Possibly Related Threads...
Thread		Author	Replies	Views	Last Post
	Question on Rod Bearings	mister86	3	3,833	03-19-2020 03:46 AM Last Post: oldeskewltoy
	RCA sizing	kazi	3	4,420	01-28-2018 10:44 PM Last Post: kazi
	rod-ends	Lajoosh	10	9,162	03-27-2012 10:24 PM Last Post: fax0815
	Panhard Rod Bolt Sizes	Corleone	8	8,083	11-07-2011 06:55 PM Last Post: Corleone
	lowering spring information HELP	martyg	1	3,340	09-27-2011 01:56 PM Last Post: martyg

User(s) browsing this thread: 2 Guest(s)