How to: Replace disc brake and pads on rear axle
07-04-2005, 08:43 PM
Post: #2
 
Step 4: we get the caliper off, we do this by unscrewing the bolt attaching the caliper to the bracket and then swiveling the caliper. Until it is free from the brake disk and only attached at the top. Simply push the caliper back and it comes right off. Put the caliper away so it is out of your way but not hanging by the brake cables! We were able to put ours on the 4links but as mentioned, banpeis 4links are a bit different.


Attached File(s) Thumbnail(s)
   

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user


Messages In This Thread
[] - Mux213 - 07-04-2005 08:43 PM
[] - Mux213 - 07-04-2005, 08:48 PM
[] - adomz - 07-04-2005, 08:49 PM
[] - Mux213 - 07-04-2005, 08:51 PM
[] - Mux213 - 07-04-2005, 08:55 PM
[] - Mux213 - 07-04-2005, 08:58 PM
[] - banpei - 07-04-2005, 09:54 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  AE86 rear axle weight megabob 11 18,830 03-29-2024 11:18 AM
Last Post: FanIsHere
  Axle width totta Crolla 1 1,072 10-24-2023 12:20 PM
Last Post: FanIsHere
  PWR light issue and no brake fluid after winter storage magpie 10 2,638 05-25-2023 08:09 AM
Last Post: Bean
  Switching diffs for disc brakes? trippin 6 2,677 07-08-2022 03:35 AM
Last Post: trippin
  How to replace the steering column UJ? Mylesmck 4 2,086 05-14-2022 07:40 PM
Last Post: Ivan141

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication