Oil breakdown
08-15-2005, 08:35 AM
Post: #4
 
Well I have followed many threads about oil and the whole subject is simply confusing.

Its the switching from mineral oil to (semi) synthetic that makes it go wrong although not all semi synthetic oil is really that synthetic so it doesn't always go wrong...

From what I know its advisable only to switch after you do an engine rebuild and all oil seals and such have been replaced by new ones...

Greetz,

Bastiaan "mux213" Olij

Moved down under, no more hachi Sad
Find all posts by this user


Messages In This Thread
Oil breakdown - Kas - 08-15-2005, 12:08 AM
[] - Mux213 - 08-15-2005, 12:17 AM
[] - James - 08-15-2005, 07:03 AM
[] - Mux213 - 08-15-2005 08:35 AM
[] - James - 08-15-2005, 08:40 AM
[] - Mux213 - 08-15-2005, 09:12 AM
[] - Kas - 08-15-2005, 03:34 PM
[] - Denmark - 08-15-2005, 03:54 PM
[] - jamiemirror - 08-15-2005, 05:22 PM
[] - Kas - 08-15-2005, 05:50 PM
[] - jamiemirror - 08-17-2005, 08:16 AM
[] - robokill - 08-17-2005, 08:45 AM
[] - Kas - 08-23-2005, 02:41 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  trans oil, lsd oil change Apolan 9 17,107 10-01-2014 03:57 PM
Last Post: mad.matt
  Oil cooler -> low oil pressure Jan Pedersen 24 30,671 06-06-2013 07:36 PM
Last Post: Deuce Cam
  4AGE crankcase gas and oil pressure too high, sprinking oil demogun 5 7,829 10-01-2011 09:47 AM
Last Post: demogun
  Oil Presure and what oil i have to use? CHACAMAN 4 5,428 08-27-2008 05:35 AM
Last Post: F0Bman
  High engine oil temps - oil cooler discussion SutteR 28 23,387 06-08-2008 11:23 PM
Last Post: eight-six

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication