aftermarket 2way LSD setup(locking % strength)
07-06-2007, 09:54 AM
Post: #2
Locking it up...
The Toyota factory LSD works just fine for stock or near stock power.
You need to make sure that it is in good condition... they do loosen
up after high miles or excessive abuse... like any clutch Smile

For normal street driving you won't even notice that it is there, but it
will stop one wheel losing traction when turning on wet or slippery
surfaces. Its both wheels or nothing Tongue

You only need a bling aftermarket LSD if you have big power, or plan
to abuse your power train with burnouts, clutch kicks and the like.

Cheers... jondee86

The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
Find all posts by this user


Messages In This Thread
Locking it up... - jondee86 - 07-06-2007 09:54 AM
[] - The Doctor - 07-06-2007, 10:05 AM
[] - Jan Pedersen - 07-06-2007, 10:13 AM
[] - Ian - AE86 - 07-06-2007, 10:34 AM
[] - ZaX - 07-06-2007, 10:57 PM
[] - The Big Yin - 07-06-2007, 11:32 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Aftermarket / Additional Foglights decryphe 6 9,455 07-08-2017 08:45 AM
Last Post: banpei
  4 Link setup and Traction brackets Jezza_hr 5 10,262 07-21-2014 09:12 PM
Last Post: Bean
  wiring aftermarket tachomete izanagi 7 9,515 05-21-2014 08:15 PM
Last Post: banpei
  DIV 1 rally/track suspension setup ditn 60 71,861 03-28-2013 11:28 PM
Last Post: ditn
  Fuel system setup 86Pilot 2 4,763 01-30-2013 04:24 PM
Last Post: Bean

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication