|
Oil Coolers
|
|
08-11-2007, 12:39 AM
Post: #12
|
|||
|
|||
|
Hi,
sorry, if my English is not perfect... Today I wanted to replace the original oil cooler with a mocal unit, cause my rally car has after long stages a temperature of more than 140°C. I wanted to shortcut the original line, by just connecting the relief valve of the original adapter to the oil pan and use a sandwich plate, also by mocal, for the mainstream. But using this sandwich plate on the original adapter, I don´t have enough space for the oil filter, cause of the header. So my question is, if it is possible to fit the sandwich plate directly on the block and leave the adapter with the relief valve away? Or are there any reasons not to make it this way, for example to much pressure,etc.. I don´t know... raki |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Oil Coolers - Simon Goes Sideways - 11-24-2004, 02:38 AM
[] - Jan Pedersen - 11-24-2004, 10:12 AM
[] - Simon Goes Sideways - 11-24-2004, 05:02 PM
[] - Simon Goes Sideways - 11-24-2004, 07:39 PM
[] - Simon Goes Sideways - 11-24-2004, 07:42 PM
[] - jamiemirror - 01-05-2005, 02:58 PM
[] - raki - 08-11-2007 12:39 AM
[] - jamiemirror - 08-11-2007, 10:01 AM
Keeping cool.... - jondee86 - 08-11-2007, 11:09 AM
[] - Rasteirinho - 09-04-2007, 08:43 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| trans oil, lsd oil change | Apolan | 9 | 17,315 |
10-01-2014 03:57 PM Last Post: mad.matt |
|
| Oil cooler -> low oil pressure | Jan Pedersen | 24 | 31,075 |
06-06-2013 07:36 PM Last Post: Deuce Cam |
|
| 4AGE crankcase gas and oil pressure too high, sprinking oil | demogun | 5 | 7,911 |
10-01-2011 09:47 AM Last Post: demogun |
|
| Oil Presure and what oil i have to use? | CHACAMAN | 4 | 5,539 |
08-27-2008 05:35 AM Last Post: F0Bman |
|
| High engine oil temps - oil cooler discussion | SutteR | 28 | 23,817 |
06-08-2008 11:23 PM Last Post: eight-six |
|
User(s) browsing this thread: 2 Guest(s)