16V to 20V Blacktop (help!)
09-18-2007, 11:49 AM
Post: #13
Re: Stock to start with :)
jondee86 Wrote:FWD engine does not have a spigot bearing fitted. It is just a standard
2RS bearing available for a few dollars from any bearing shop. You will
need to measure the inside and outside diameter, as I don't have a note
of the size. Otherwise buy it from an auto parts store. Tap it into the end
of the crankshaft until it stops moving.

Cheers... jondee86


NSK K01 6001V
DXdXl (diam.external, diam.internal, thickness)
28X12X8 mm
sealed
Visit this user's website Find all posts by this user


Messages In This Thread
16V to 20V Blacktop (help!) - 86Pilot - 09-12-2007, 03:59 PM
[] - speed-inc - 09-12-2007, 04:14 PM
[] - 86Pilot - 09-12-2007, 04:19 PM
[] - speed-inc - 09-12-2007, 04:29 PM
[] - 86Pilot - 09-12-2007, 04:47 PM
[] - speed-inc - 09-12-2007, 05:00 PM
Keep it simple... - jondee86 - 09-13-2007, 11:00 AM
[] - speed-inc - 09-13-2007, 05:29 PM
[] - 86Pilot - 09-13-2007, 05:48 PM
Stock to start with :) - jondee86 - 09-14-2007, 10:34 AM
[] - 86Pilot - 09-14-2007, 11:39 AM
Mothra vs Godzilla !!!! - jondee86 - 09-14-2007, 12:35 PM
Re: Stock to start with :) - jamiemirror - 09-18-2007 11:49 AM
[] - 86Pilot - 09-19-2007, 11:37 PM
[] - speed-inc - 09-20-2007, 09:24 AM
[] - jamiemirror - 09-20-2007, 09:55 AM
[] - Jezza_hr - 09-21-2007, 04:34 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Refreshed 20v blacktop first start.. Mylesmck 6 821 10-07-2024 07:55 AM
Last Post: Ivan141
  20v Blacktop conversion.... Mylesmck 0 503 04-29-2024 05:48 PM
Last Post: Mylesmck
  Improve 20V Blacktop cooling pack 0 1,010 06-07-2023 01:18 PM
Last Post: pack
  Shims 20V Blacktop CHOPKIN2 3 4,792 12-23-2017 11:07 PM
Last Post: oldeskewltoy
  stock injector deadtime for 4age 20v silvertop/blacktop injector ditn 1 5,923 02-20-2016 11:48 AM
Last Post: Bean

Forum Jump:


User(s) browsing this thread: 4 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication