Hoiw to remove the starter?

[Ivan141]

Okay, I did this a couple of times, you have 2 options.
First is taking it out between manifold and firewall. You can squeeze it through there with a bit of twisting and turning. First you need to remove the little heatshield attached to the top of the starter, this makes it small enough to fit through, then remove the 2 bolts holding it to the bellhousing. Your best bet is to remove the lower bolt from under the car.

Then there is option nr 2. Remove the heatshield from the starter as well, and remove oil filter, then take out from frontside. This is supposed to be easier.