7afe with 4agze tranny

[Niek]

Im building a 7agze with a 4agze tranny (FWD).
Now ive already gor the tranny and it bolts on nicely.

Now the challange here is to get the flywheel/clutch combo correctly.

I was first thinking of a custom flywheel, but thats just to expensive for now. Got an offer from fidanza for a custom flywheel at $1500.

The other option would be to get a 7afe clutch that fits the 4agze spline.
Now ive been talking to both fidanza and spec clutches about this and both offered me a clutch solutoioon.
Fidanza is cheaper, but wont provide the correct bearings and pilot tool, while spec will provide the correct bearing etc.

Now the question, fidanza or spec? I havent got any experience with their clutches so hopefully you guys can enlighten me

[RoninMax]

Did you know Toda make the flywheel for 7AFE Flywheel? The part # for Toda is 22100-7AF-000. Basically, The 7AFE Flywheel is 212mm just like 4AGE but only have 6 bolt to bolt on to the crankshaft.

[Niek]

thanx for the info Max, ill take a look at it.
Im also checking the 225mm flywheel from a 3TC.
I measured the 4agze flywheel I have here and its ~230mm, so if im correct I have a late E58. Toyota didnt put identifycations on the tranny

[RoninMax]

All GZE trans is E serious that is the same of the SW20 Turbo. Did you know The LSD of AW11 GZE and SW20 Tubro are the same part #? Hope will give you some idea.

[F0Bman]

Sounds like an appropriate combination man1 Good work.