nzae86's TRD ae86 N2 Race Car Project 2,
10-15-2010, 08:01 AM
Post: #401
nzae86's TRD ae86 N2 Race Car Project 2,
PS I tried Tilton as well, they are identical clutches basically most parts between them are interchangeable. I know you probably have a hydraulic bearing setup in, and the smaller flywheel to suit, but really doubt a multiplate is the way to go...
Find all posts by this user
10-15-2010, 08:11 AM
Post: #402
nzae86's TRD ae86 N2 Race Car Project 2,
4000GT Wrote:PS I tried Tilton as well, they are identical clutches basically most parts between them are interchangeable. I know you probably have a hydraulic bearing setup in, and the smaller flywheel to suit, but really doubt a multiplate is the way to go...

The tilton are available in different clamping pressures , and it appears the quartermaster is not ,so have ordered one to suit my needs, the friction plates are the same but the tilton are of a different design to the quartermasters as they do not have a continuous ring , the cover plate sits on pedestals instead allowing the dust to escape and not jam the plates .I have raced cars with a twin plate with great success , and with less rotating mass attached to the flywheel it is what I'm after.

Your addiction to motorsport can only be cured by poverty !!
Find all posts by this user
10-15-2010, 08:27 AM
Post: #403
nzae86's TRD ae86 N2 Race Car Project 2,
You can just mod the cover pivots for different clamping pressures... I always found them a little harsh on gearboxes personally.
Find all posts by this user
10-15-2010, 01:03 PM
Post: #404
nzae86's TRD ae86 N2 Race Car Project 2,
[Image: AEU86 AE86 - nzae86's TRD ae86 N2 Race Car  Project 2,]

An 86 is for Life, not just for Christmas
Find all posts by this user
10-16-2010, 01:30 AM
Post: #405
nzae86's TRD ae86 N2 Race Car Project 2,
nzae86 Wrote:Now sitting on slicks with the gold look of yesteryear !

[Image: AEU86 AE86 - nzae86's TRD ae86 N2 Race Car  Project 2,]

Real gangsters roll on gold Cool
[Image: AEU86 AE86 - nzae86's TRD ae86 N2 Race Car  Project 2,]

[Image: AEU86 AE86 - nzae86's TRD ae86 N2 Race Car  Project 2,]
RokuSteady : Shakotan - Tsuraichi - Hippari - Onikyan : 神奈川 様式
Find all posts by this user
10-16-2010, 01:55 AM
Post: #406
nzae86's TRD ae86 N2 Race Car Project 2,
Kid Karola Wrote:
nzae86 Wrote:Now sitting on slicks with the gold look of yesteryear !

[Image: AEU86 AE86 - nzae86's TRD ae86 N2 Race Car  Project 2,]

Real gangsters roll on gold Cool
[Image: AEU86 AE86 - nzae86's TRD ae86 N2 Race Car  Project 2,]



That used to be my pile of bricks until I started building this car!!!!

Your addiction to motorsport can only be cured by poverty !!
Find all posts by this user
10-17-2010, 09:41 PM
Post: #407
nzae86's TRD ae86 N2 Race Car Project 2,
nzae86

Nice car!! I love it!! pls. there is any way you tell where I can
buy the N2 body kit?? yours looks perfect!!

Thanks for your time.

marco vargas
Find all posts by this user
11-02-2010, 06:06 AM
Post: #408
nzae86's TRD ae86 N2 Race Car Project 2,
4000GT Wrote:
nzae86 Wrote:
4000GT Wrote:What was your exhaust config out of interest? size and muffler brand and arrangement?

Hi the exhaust is made from 2 1/2 inch stainless with a muffler that is used on the TRS single seater cars here(Toyota Racing Series) .I will have another muffler made with an off set in and out and hope that is a bit quieter.
There is a pic of it a few pages back
cheers

Ah nice, are the TRS mufflers available for sale locally or is it a controlled thing? I was only going to run a couple of resonators on mine, but my have to run a muffler, I guess we will see what the cert man has to say!

Hello, what is your resonator? Its brand specifically?
Find all posts by this user
11-02-2010, 06:26 AM
Post: #409
nzae86's TRD ae86 N2 Race Car Project 2,
Your AE86 project have a nice progress. Hope to see some updates on it. Good job! Big Grin
Find all posts by this user
11-02-2010, 08:34 AM
Post: #410
nzae86's TRD ae86 N2 Race Car Project 2,
white86 Wrote:nzae86

Nice car!! I love it!! pls. there is any way you tell where I can
buy the N2 body kit?? yours looks perfect!!

Thanks for your time.

marco vargas

Hi there
I have made my N2 kit myself from moulds that I made a few years ago from a genuine TRD kit that came from Japan. I taught myself how to fiberglass it's not that difficult .

Thanks

Your addiction to motorsport can only be cured by poverty !!
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  nzae86's AE86 Levin Tarmac rally car build Project 1 nzae86 30 56,115 04-30-2013 07:28 AM
Last Post: nzae86
  my celica race car with race beams Celica RA45 14 20,739 09-14-2011 11:50 AM
Last Post: Celica RA45
  AKR's Daily-driver-race-car asian knight rider 5 10,536 11-01-2009 12:25 AM
Last Post: doggy
  My Project car :D Muchomuchacho 5 6,614 06-05-2008 05:15 PM
Last Post: Muchomuchacho
  A.D.D Performance Demo car (AE86 project) cab32 15 17,657 03-24-2008 03:34 PM
Last Post: cab32

Forum Jump:


User(s) browsing this thread: 6 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication